Showing 1 to 10 of 20 projects.
BiCDMOS Tube L6229 General Purpose motor controller 52V 1.4A 7.6mm -25C~125C TJ
View all
https://maker.pro/arduino/projects/machine-learning-for-makers-how-to-control-dc-motors-with-voice-commands
Use the machine learning program Wekinator and an Arduino UNO to control DC Motors with your voice!
https://maker.pro/wekinator/projects/learn-how-to-control-a-dc-motor-using-wekinator-and-an-arduino
Utilize the Wekinator DTW Mouse Explorer application and test its control using Arduino and DC motors.
https://maker.pro/arduino/projects/arduino-robot-tutorial
Learn how to interface DC motors, IR sensors, and motor drivers with an Arduino to make an obstacle-avoiding robot.
https://maker.pro/breadboard/projects/simultaneous-dual-motor-control
This project describes the HVPAK configured as a controller for two brushed DC motors with independent control.
https://maker.pro/raspberry-pi/projects/controlling-a-dc-motor-with-raspberry-pi4-1
In this tutorial, I will show you how to connect some motors to your Raspberry Pi4.
https://maker.pro/arduino/projects/the-beginners-guide-to-control-motors-by-arduino-and-l293d
In this article, you will learn how to control DC, Stepper, and servo motors by Arduino and L293D.
https://maker.pro/custom/projects/brushed-dc-motor-programmable-speed-regulator
This article explains how to design, build a low noise high performance low cost brushed DC motor programable speed regulator. The regulator is immune to the temperature, voltage, and motor load variation. Also, this circuit does not care about the motor coil resistance which allows using different motors in one application without any adjustments.
https://maker.pro/raspberry-pi/projects/raspberry-pi-dc-motor-control-with-custom-board
In this tutorial, you are going to learn about how to control DC motor with Raspberry Pi.
https://maker.pro/custom/projects/3-phase-brushless-dc-motor-control-with-hall-sensors
Check out how to control a 3-phase brushless DC motor using a GreenPAK IC.
