Simplest way to make Induction Heater, Power Supply, and HV Source from CFL Bulb Ballast
https://maker.pro/analog/projects/simplest-way-to-make-induction-heater-power-supply-and-hv-source-from-cfl-bulb-ballast
An interesting project that describes how to make several useful devices using a CFL bulb ballast, with minimal modification.
An open-source infrared induction light control night light
https://maker.pro/pcb/projects/an-open-source-infrared-induction-light-control-night-light
In the schematic design, each feet use a method of resistance partial pressure to change the pin voltage, and the contro
Induction heater, HV source, and Wireless Energy transfer with chip mini ZVS Driver from Aliexpress
https://maker.pro/analog/projects/induction-heater-hv-source-and-wireless-energy-transfer-with-chip-mini-zvs-driver-from-aliexpress
How to make some practical devices with a cheap compact ZVS driver module sold on AliExpress for less than $5.
DIY Induction Heater with Ferrite Core Coil
https://maker.pro/analog/projects/diy-induction-heater-with-frrite-core-coil
An electric conductor such as iron container placed in the variable magnetic flux is heated rapidly by induced eddy current.
DIY Simple Sensitive IB Metal Detector with 2xNE555 IC
https://maker.pro/arduino/projects/diy-simple-sensitive-ib-metal-detector-with-2xne555-ic
A relatively sensitive IB (Induction balance) Metal Detector which is very easy to make, and contains a few standard electronic components
Unusual Led Ring Arduino Clock, Temperature, and Humidity meter
https://maker.pro/anduino/projects/unusual-led-ring-arduino-clock-temperature-and-humidity-meter
Although this is a very simple Arduino project, it contains more different options, as well as a very intuitive way to show a lot of information on the "Display" consisting of only 12 LEDs.
HOW TO CREATE A 3D LOCK USING 3D MODELING SOFTWARE
https://maker.pro/amazon-alexa/projects/how-to-create-a-3d-lock-using-3d-modeling-software
In this tutorial article, we will be going through the steps of how to design a 3D lock in SelfCAD